- Lab
-
Libraries: If you want this lab, consider one of these libraries.
- Cloud

Multiple IPs on the Same Interface
In this learning activity, you're being tasked with adding two more IPs to the the existing environment. There is currently a private IP of 10.0.1.10. You must add 10.0.1.15 and 10.0.1.20.

Lab Info
Table of Contents
-
Challenge
Add the Additional IP Address Configuration
The command we can use to add the additional addresses is:
[cloud_user@host]$ sudo nmcli c mod System\ eth0 ipv4.addresses 10.0.1.15/24,10.0.1.20/24
-
Challenge
Restart Networking
Once we're confident in the configuration, we can restart networking using:
[cloud_user@host]$ sudo systemctl restart network
About the author
Real skill practice before real-world application
Hands-on Labs are real environments created by industry experts to help you learn. These environments help you gain knowledge and experience, practice without compromising your system, test without risk, destroy without fear, and let you learn from your mistakes. Hands-on Labs: practice your skills before delivering in the real world.
Learn by doing
Engage hands-on with the tools and technologies you’re learning. You pick the skill, we provide the credentials and environment.
Follow your guide
All labs have detailed instructions and objectives, guiding you through the learning process and ensuring you understand every step.
Turn time into mastery
On average, you retain 75% more of your learning if you take time to practice. Hands-on labs set you up for success to make those skills stick.