- Lab
- Core Tech
Test Basic Network Connectivity - Part 1
In this lab, you’ll practice network connectivity. When you’re finished, you’ll have set up a network and performed analysis and tests.
Path Info
Table of Contents
-
Challenge
Get Started in the Lab Environment
Here are the initial instructions and explanation of the lab environment. Read this while your environment is busy creating itself from nothing. Yes, this violates physics; we know. How fun!
-
Challenge
Start the Network Environment
You’ll start testing network connectivity. When you’re finished, you’ll have a network setup with Open vSwitch.
-
Challenge
Configure Open vSwitch
In this challenge, you’ll further configure Open vSwitch (OVS). When you're finished, you’ll have set up hosts and connected to OVS.
-
Challenge
Test Open vSwitch
To complete this lab, you’ll start testing network connectivity in Open vSwitch. When you’re finished, you’ll have assigned IP addresses and performed connectivity testing.
What's a lab?
Hands-on Labs are real environments created by industry experts to help you learn. These environments help you gain knowledge and experience, practice without compromising your system, test without risk, destroy without fear, and let you learn from your mistakes. Hands-on Labs: practice your skills before delivering in the real world.
Provided environment for hands-on practice
We will provide the credentials and environment necessary for you to practice right within your browser.
Guided walkthrough
Follow along with the author’s guided walkthrough and build something new in your provided environment!
Did you know?
On average, you retain 75% more of your learning if you get time for practice.