- Lab
-
Libraries: If you want this lab, consider one of these libraries.
- Cloud

Locating Network Configuration Information from the Command Line
Being able to find and understand network configuration information is fundamental to using Linux on a network. In this hands-on lab, we will determine the network configuration for the eth0 interface of the lab host.

Lab Info
Table of Contents
-
Challenge
Determine the IP Address
- Run the following command:
sudo ip addr show
- Note the IPv4 and IPv6 addresses in the output.
-
Challenge
Determine the MAC Address
- Run the following command:
sudo ip addr show
- Note the MAC address in the output.
-
Challenge
Determine the Gateway
- Show the routing table.
sudo ip route show
- Note the gateway in the output.
-
Challenge
Determine the DNS Server
- Show the DNS nameserver:
cat /etc/resolv.conf | grep nameserver
- Note the DNS server in the output.
About the author
Real skill practice before real-world application
Hands-on Labs are real environments created by industry experts to help you learn. These environments help you gain knowledge and experience, practice without compromising your system, test without risk, destroy without fear, and let you learn from your mistakes. Hands-on Labs: practice your skills before delivering in the real world.
Learn by doing
Engage hands-on with the tools and technologies you’re learning. You pick the skill, we provide the credentials and environment.
Follow your guide
All labs have detailed instructions and objectives, guiding you through the learning process and ensuring you understand every step.
Turn time into mastery
On average, you retain 75% more of your learning if you take time to practice. Hands-on labs set you up for success to make those skills stick.